IEEE1394 DCAM(FireWire) |
File Download Link |
|
PC Requirements
|
166Mhz Pentium class CPU or Greater
(MMX required for PatMax software) |
|
PCI-or AGP-based video display adaptor with at least 8MB of RAM,support for Direct Draw,and operating in a minimum 256 color mode,AGP is preferred. |
|
One open +5V/3.3V PCI expansion slot |
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
Memory |
N/A |
|
Video Input |
Supports IEEE 1394a and IEEE 1394b (FireWire) camera using DCAM 1.3or later |
|
Up to three (3) cameras can be connected directly to the interface card. FireWire hubs are supported to enable additional cameras |
|
Supports resolutions from 640X480 up to 2KX2K |
|
Supports both color and monochrome cameras |
|
Parallel I/O |
Optional I/O kit provides: |
|
24 lines of digital TTL I/O |
|
Two banks of 8,two banks of 4,each bank programmable as input or output |
|
Eight lines of opto-isolation available via breakout panel |
|