|
Model |
KP-FD140F |
KP-FD32F |
|
Imaging device |
1/2-inch interline CCD |
|
|
Total pixels |
1434 (H) x 1050 (V) |
692 (H) x 504 (V) |
|
Effective pixels |
1392 (H) x 1024 (V) |
656 (H) x 492 (V) |
|
Pixel size |
4.65 µm (H) x 4.65 µm (V) |
9.9 µm (H) x 9.9 µm (V) |
|
Color filter |
RGB primary color mosaic filters |
|
Scanning system |
Progressive scan |
|
Synchronization |
Internal / external (auto selection) |
|
Video signal output |
|
|
Interface |
IEEE1394.b (FireWire800) Protocol: IEEE1394-based Digital Camera Specification Version 1.31 compliant Transfer rate: 800 / 400 / 200 Mbps |
|
Image format |
RGB24/ YUV(4:2:2) / Raw8 / Raw16 |
|
Image size |
1360(H)x1024(V), 1280(H)x960(V) |
656 (H) x 492 (V) |
|
1024(H)x768(V), 800(H)x600(V) |
640 (H) x 480 (V) |
|
640(H)x480(V) |
|
|
Frame rate |
15 fps (RGB24, 1360 x 1024) |
60 fps (RGB24, 656 x 492) |
|
Standard sensitivity |
2000 lx F8 |
2000 lx F5.6 |
|
Gain |
Auto / Manual (0 dB to 18 dB) |
|
Electric shutter |
Auto (AES) / Manual (VARIABLE) 1/100,000 second to 10 second |
|
External trigger shutter |
|
|
Mode |
Fixed shutter (Mode0), One trigger (Mode1),Reset control (Mode14), VD Sync (Mode15) |
|
Input |
Software Trigger: 1394 Cable Hardware Trigger: 1394 Cable (Hitachi System) standard model, or 12 pin connector on S2 or S3 model. |
|
White balance |
ATW / MANUAL / One-Push |
|
Dimensions |
44 (W) x 44 (H) x 48 (D) mm (not including lens) |
|
Mass |
Approx. 130 g (not including lens) |
